RECENT PRESENTATIONS IN THE TECHNICAL CONFERENCES
“Computational air flow simulations in HVAC/IAQ/Fire Protection", American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) Oregon Chapter, Portland, Oregon, October 14, 2010
“Introduction to displacement ventilation system and its related issues”, invited for a talk at monthly energy analyst group teleconference, Trane Company, July 9, 2009
“CFD Applications in smoke control CFD simulation”, Monthly educational seminar, Society of Fire Protection Engineers (SFPE) Cascade chapter, Portland, OR, June 14, 2009
“CFD experience at Glumac”, Industry advisory meeting, Center for the Built Environment (CBE), University of California, Berkeley, CA, October 23, 2008
“How CFD can be useful in HVAC/IAQ systems”, invited for a talk at the ASHRAE Rochester chapter meeting, ASHARE Rochester Chapter, Rochester, Minnesota, December 19, 2006
“Computational Fluid Dynamics (CFD) in HVAC Practice”, invited for a talk at the 2006 Education Seminar (Building Energy Performance beyond Code), ASHARE Minnesota Chapter, Minneapolis, Minnesota, April 11, 2006
“Computational Fluid Dynamics (CFD)
modeling to improve design, installation and operation
of HVAC systems”, the 9th Annual Midwest IAQ Conference
& Trade Show Sponsored by Institute of Environment
Assessment (IEA), Bloomington, Minnesota, October 30-31,
2003.
“Introduction to thermal displacement ventilation”,
Annual Training Seminar of Chief Engineers Guild in Minnesota,
Minnesota, September 3-5, 2003.
“Introduction to computational
airflow simulation for IAQ/HVAC applications”, Annual
Training Seminar of Chief Engineers Guild in Minnesota,
Minnesota, September 3-5, 2003.
“Several examples of CFD on various
HVAC/IAQ engineering applications”, Quarterly Meeting
of Minnesota State Colleges & Universities (MNSCU),
Normandale College, Bloomington, Minnesota, June 11, 2003.
“Numerical investigation of underground
parking garage”, invited for a talk to ASHRAE Seminar
of T.C. 4.10 Indoor Air Quality, Cincinnati, Ohio, 2001.
“Effect of location of heat Source
on displacement ventilation”, the ROOMVENT 2000
Conference, the University of Reading, Reading, UK, July
2000.
"Numerical study of inclusions transport
in a slag layer inside a ladle with gas injection",
ASME Fluids Engineering Division Summer Meeting, Washington,
D.C. USA, June 21-25, 1998.
"Enhancement of the image of holographic
particle image velocimetry (HPIV)", the 1st Symposium
on Flow Visualization and Image Processing, Hawaii USA,
February 1997.
"Numerical simulation on flow in
gas stirred ladle systems with and without throughflow",
ASME Heat Transfer Division, the International Mechanical
Engineers Congress & Exposition (IMECE), Atlanta,
Georgia, November 1996.
RECENT PUBLICATIONS
"CFD Study of Helipad Area at Hospital to Prevent Exhaust from Entering the Hospital", in writing, 20011
"Natural Ventilation System", with K. Bae, internal white paper, Glumac International, Portland, OR June 2009
"CFD Analysis Assists in Optimization of Thermal Displacement Ventilation for an Elementary School Auditorium", Design Solution Section, HPAC Engineering, May 2005
"High Tech at Low Cost", Occupational Health & Safety, Vol. 74, No.1, pp. 32-36, January 2005
"Optimization of Thermal Displacement
Ventilation for Elementary School Auditorium", manuscript
accepted to Engineered Systems for publicationin preparation,
2004.
“Computer Simulation Ensures Low
Carbon Monoxide Levels in Parking Structure”, Parking
News Magazine, Issue 204, pp.16-19, British Parking Association,
July 2002. (This article was selected and awarded Ernest
Davies Award from British Parking Association.)
“Numerical Study on Enhancement
of the Mixing Effectiveness in Air Handling Unit Mixing
Chamber”, accepted to AIVC conference held on UK,
September 2001.
"Effect of Location of Heat Source
on Displacement Ventilation”, Building & Environment,
Vol. 36, pp.883-889, 2001. (Selected among papers presented
in the ROOMVENT 2000 Conference).
“The Effect of Location of a Convective
Heat Source on Displacement Ventilation: CFD Study”,
Proceedings of the ROOMVENT 2000 Conference Vol. 2, pp705-710,
2000.
"Numerical Study of Inclusions Transport
in a Slag Layer inside a Ladle with Gas Injection",
Proceedings of ASME Fluids Engineering Division Summer
Meeting, FED-Vol. 245, No. 5264, Washington, D.C., June
21-25, 1998.
"Turbulent Two-Phase Mixing in Gas-Stirred
Ladle Systems for Continuous Casting Application",
Numerical Heat Transfer, Part A, Vol.31, No.5, pp.493-516,
1997.
"Enhancement of the Image of Holographic
Particle Image Velocimetry (HPIV)", Proceedings of
the 1st Symposium on Flow Visualization and Image Processing
Vol. 2, pp.546-551, Hawaii, USA, February 1997.
"Numerical Simulation on Flow in
Gas Stirred Ladle Systems with and without Through Flow",
HTD-Vol. 334, Proceedings of the ASME Heat Transfer Division
Vol. 3, pp.361-369, Atlanta, USA, November 1996.
|
